SJR 300TT Barrel Type Dispensing Robot System 
 Characteristics: 
 - Operating panel with color LCD touch-type, easy to operate; 
 - ROBOT and DISPENSER designed as a whole, can achieve the small form factor, the precise effect of spit; 
 - Additional features of the ROBOT (DISPENSING the TIME CONDITIONING, digital display device of the pressure value and built-in controller, JIG the VACUUM, etc.), a wide range of applications; 
 - Can be installed on a variety of DISPENSING HEAD, SYSTEM, composed of simple. 

 Parameters: 








 The ROBOT Stroke, (mm) 
 Travel X AXIS (X axis): 300mm, Y-the AXIS Y-axis 550mm, Z-the AXIS (Z-axis) 100mm 
 Motor Capacity (W) 
 X, Y, and Z the AXIS: 0.9 degrees Micro the Stop Motor 
 Speed ??(mm / sec) X, Y, the AXIS: MAX to 500 mm / sec 
 Z AXIS: MAX 250mm/sec 
 Program Possible stor 100 EA (1000stop each) 
 Input: Collar Touch-Screen Menu 
 Repeatability X, Y: + _0.02; Z: + _0.015 
 Payload (kgf) X: 20kgf Z: 5kgf 
 Runing the Type X, Y, the AXIS: LM GUIDE. 
 Z AXIS: the LM GUIDE., BALL SCREW the TYPE 




 Dispensing Part Controller Applicable to 1-4 ZXIS, 
 Dispensing time, the Air Pressure: Digital Display 
 TIME: MIN 0.01 the SEC 
 AIR PRESSURE: 0.01kgf/cm2-6.00kgf/cm2 
 LINETEL, POINTEL, SD200S 
 CONDITIONING CONTROLLER APPLICABLE TO 1-4 the AXIS 
 CPID the CONTROL the DIGITAL DISPLAY MAX 100 degrees, 150 degrees. 


 SJR 300TT Heating Dispensing Robot System 
 Characteristics: 
 - BARREL CONDITIONING special structure, can make the bottom of the CONDITIONING NEEDLE can achieve the precise effect of the spit; 
 - HOT MALTE, EPOXY heated liquid, this machine is the best choice; 
 - Operating panel with color LCD touch-type, easy to operate; 
 - ROBOT and DISPENSER designed as a whole, can achieve the small form factor, the precise effect of spit; 
 - Additional features of the ROBOT (DISPENSING the TIME CONDITIONING, digital display device of the pressure value and built-in controller, JIG the VACUUM, etc.), a wide range of applications.